Home › Models › BYD SHARK 6 › Troubleshooting
This hub lists every general troubleshooting guide for the BYD SHARK 6, a plug-in hybrid dual-cab ute. The guides are general reference only: they describe systems, symptoms to note and when to stop driving and call for help. Always consult an authorised BYD dealer for diagnosis, refer to the official owner’s manual for warning lights, and treat the details as subject to manufacturer specifications.
Contents
Systems and guides
- BYD SHARK 6 Battery & Charging System — Blade Battery care and diagnostics, CCS2 and Type 2 charge port maintenance, home wallbox charging, V2L/VTOL operation, charging speed complaints, battery state of health questions.
- BYD SHARK 6 Electric Drive Unit — Permanent magnet drive motor(s), power electronics, noise and vibration symptoms, motor mounts, warning messages.
- BYD SHARK 6 Thermal Management & Cabin Climate — Heat pump, battery liquid cooling loop, air conditioning, PM2.
- BYD SHARK 6 Suspension, Wheels & Tyres — Suspension layout for this model, EV-specific tyre wear (weight and instant torque), alignment, bushings, noises, tyre pressure and replacement guidance.
- BYD SHARK 6 Brake System & Regeneration — Regenerative and friction brake blending, pads and discs wear, brake fluid, pedal feel, handbrake (EPB).
- BYD SHARK 6 Steering System & Alignment — Electric power steering (EPS), steering rack, sensor calibration, noises, steering feel, alignment.
- BYD SHARK 6 12V Auxiliary Electrical System — 12V auxiliary battery drain and flat battery symptoms, jump-start rules for EVs/PHEVs, NFC card key and smart key, lighting, fuses.
- BYD SHARK 6 DiLink Touchscreen & Infotainment — Rotating touchscreen, DiLink software, OTA firmware updates, Apple CarPlay and Android Auto, freezes and resets, audio system, BYD app.
- BYD SHARK 6 DiPilot Driver Assistance Systems — Cameras, radar and ultrasonic sensor calibration, AEB, lane keep assist, adaptive cruise, 360-degree camera, airbags and ANCAP context.
- BYD SHARK 6 Bodywork, Glass & Interior Fittings — Panoramic glass roof (where fitted), door handles, tailgate, seats and upholstery, boot and storage, water leaks and rattles, care in Australian sun.
- BYD SHARK 6 Towing & Factory Accessories — Towbar and wiring, towing and payload context from the facts, factory accessories, roof racks, load limits, warranty considerations.
- BYD SHARK 6 1.5L Hybrid Engine & Fuel System — The petrol engine of this plug-in hybrid: oil and filter servicing, spark plugs, air filter, fuel system, GPF, EV/HEV mode interaction, starting behaviour.
Before you start
Note what the dashboard shows, when the symptom occurs and whether it repeats, then contact an authorised BYD dealer. Do not open or touch high-voltage components or orange cabling. Check the official owner’s manual for the meaning of any warning light, and confirm warranty cover with BYD Automotive Australia before any repair outside the dealer network.
Frequently Asked Questions
Where do I start if my BYD SHARK 6 shows a warning light?
Stop in a safe place, read the message and look it up in the official owner’s manual, then contact an authorised BYD dealer.
Can I repair high-voltage parts myself?
No. High-voltage work must be done by an authorised BYD dealer or a suitably qualified technician.
Does independent troubleshooting affect the warranty?
Unapproved repairs or modifications may affect warranty cover; confirm with BYD Automotive Australia or an authorised dealer first.
Where can I see servicing and warranty information?
See the BYD SHARK 6 servicing guide and the warranty guide.
See Also
- BYD SHARK 6 Review & Overview
- BYD SHARK 6 Warranty & Documentation
- BYD SHARK 6 Logbook Servicing Guide
- BYD SHARK 6 Spare Parts & VIN Sourcing
Sources
Disclaimer: This guide is for informational purposes only. Official specifications, recall details, and warranty terms are determined by BYD Automotive Australia (EVDirect). Always consult an authorized dealer or official owner’s manual.