
This page provides an independent, factual overview of the BYD ATTO 3 compact SUV for the Australian market. It outlines the key technical specifications, dimensions, battery capacities, and warranty terms for the pure electric (BEV) variants offered by EVDirect. Please note that trim names, specifications and prices reflect a compiled dataset (October 2026) and that BYD Automotive Australia may update variants, so every figure must be confirmed with an authorised BYD dealer or the official BYD Australia website.
Guides for this model
Pricing & Buyingvariants, pricing information and how to buy
Warranty & Documentsvehicle, battery and component warranty
Logbook Servicingservice intervals and what is checked
Powertrain & Fuelmotor, battery, charging and fuel facts
Spare Parts & VINsourcing parts, genuine vs aftermarket
Accessories & Towingaccessories, upgrades and towing
Troubleshootingsystems, symptoms and when to call a dealer
Contents
- Price range in Australia
- Positioning and Body Type
- Powertrain and Performance
- Battery, Range and Charging
- Dimensions and Cargo Space
- Safety Rating and Equipment
- Warranty and Servicing
- Frequently Asked Questions
- See Also
- Sources
Price range in Australia
BYD Automotive Australia does not publish prices on its own model page. The independent automotive site Drive lists the manufacturer’s recommended list price (MRLP) for the BYD ATTO 3 and ATTO 3 EVO, excluding on-road costs, as shown below (listing checked on 4 October 2026).
| Model | MRLP range, excluding on-road costs | Variants listed |
|---|---|---|
| BYD ATTO 3 | $39,990 to $44,990 | 2 |
| BYD ATTO 3 EVO | $41,990 to $46,990 | 2 |
On-road costs such as registration, stamp duty and dealer delivery are not included, so the driveaway price will be higher and differs by state and territory. Drive shows the range across the variants and does not tie each price to a variant, so ask an authorised BYD dealer for the exact price of the variant and options you want. Prices change and are subject to manufacturer specifications and dealer terms, so confirm with BYD Automotive Australia before buying.
Positioning and Body Type
The BYD ATTO 3 is a five-seat compact SUV sold exclusively as a pure electric vehicle in Australia. It is built on BYD’s e-Platform 3.0 and e-Platform 3.0 Evo architectures. The current lineup includes the ATTO 3 (available in Essential and Premium trims) and the updated ATTO 3 EVO (available in Dynamic and Premium trims).
Because manufacturer brochures and the official website omit precise retail figures, you must consult an authorised BYD dealer to obtain the exact vehicle price. Furthermore, the final driveaway price across NSW, VIC, QLD, WA, and SA will vary based on state-specific registration fees and stamp duty.
Powertrain and Performance
The BYD ATTO 3 range utilizes permanent magnet synchronous motors. The standard ATTO 3 Essential and Premium variants, alongside the ATTO 3 EVO Dynamic, are configured with front-wheel drive. These models produce 150 kW of power and 310 Nm of torque. The ATTO 3 EVO Premium introduces a rear-wheel drive layout with an output of 230 kW and 380 Nm.
Performance figures indicate a 0-100 km/h time of 7.9 seconds for the Essential, 7.3 seconds for both the ATTO 3 Premium and ATTO 3 EVO Dynamic, and 5.5 seconds for the more powerful ATTO 3 EVO Premium. While these are the official specifications, a 0-100 km/h acceleration during a real world test may yield different results depending on tyre condition, payload, and weather. Top speed is limited to 160 km/h for the EVO Dynamic and 180 km/h for the EVO Premium. Any inspection of the high-voltage powertrain must be completed by a qualified technician, and high-voltage orange cables must not be touched or opened by owners.
Battery, Range and Charging
Energy storage is provided by the BYD Blade Battery, utilizing lithium iron phosphate (LFP) chemistry. Capacity varies by model: the Essential features a 49.92 kWh battery, while the Premium and EVO Dynamic variants are equipped with a 60.48 kWh pack. The EVO Premium utilizes a larger 74.88 kWh battery and an 800 V electrical architecture, compared to the 400 V system on the Dynamic.
When evaluating a BYD Atto 3 Standard vs Extended Range comparison, the NEDC range for the ATTO 3 is 410 km (Essential) and 480 km (Premium). On the stricter WLTP standard, the ATTO 3 yields 345 km and 420 km respectively. The ATTO 3 EVO offers a WLTP driving range of 420 km (Dynamic) and 510 km (Premium). Energy consumption for the EVO is rated at 16.0 to 16.4 kWh/100 km. It is important to note that the real world highway range based on WLTP figures for Australia depends heavily on operating speeds and payload, subject to manufacturer specifications.
All models feature regenerative braking, a Type 2 AC charging port, and a CCS 2 DC charging port. DC charging capacity spans from 70 kW on the Essential to 220 kW on the EVO Premium, the latter achieving a 0-80% charge in 30 minutes. Every variant includes a Vehicle-to-Load (V2L) function and a V2L discharge adapter.
Dimensions and Cargo Space
The exterior dimensions for all trims measure 4,455 mm in length, 1,875 mm in width, and 1,615 mm in height, with a wheelbase of 2,720 mm. Unladen ground clearance is 175 mm, dropping to 150 mm when laden. Kerb weight spans from 1,680 kg on the Essential to 1,880 kg for the EVO Premium.
| Metric | ATTO 3 Essential | ATTO 3 EVO Premium |
|---|---|---|
| Length (mm) | 4,455 | 4,455 |
| Kerb Weight (kg) | 1,680 | 1,880 |
| Boot Capacity (L) | 440 – 1,340 | 490 – 1,360 |
| Braked Towing (kg) | 750 | 1,500 |
The standard boot provides a minimum luggage capacity of 440 litres (434 L for EVO Dynamic, 490 L for EVO Premium) and expands to 1,340 litres (1,360 L for EVO Premium) with the rear seats folded. The EVO Premium also includes a 101-litre front boot under the bonnet. Towing capacity is rated at 750 kg unbraked across the board. Braked capacity is 750 kg for most trims, increasing to 1,500 kg exclusively for the EVO Premium. If fitting cargo accessories such as a boot liner and all weather rubber floor mats, refer to the official owner’s manual to ensure they do not obstruct any floor fixtures.
Safety Rating and Equipment
Standard equipment on all BYD ATTO 3 variants includes a 360-degree monitor, front and rear parking sensors, adaptive cruise control, automatic emergency braking, blind spot detection, and door open warning. The EVO models add advanced systems such as driver monitoring, child presence detection, and intelligent speed limit control. While the official website displays an ANCAP logo, prospective buyers should check the official ANCAP website for the exact star rating. Any dangerous work involving ADAS calibration, airbags, or steering must be performed by an authorised BYD dealer.
The cabin features synthetic leather seats, a PM2.5 air filter, and an intelligent rotating touch screen measuring 12.8 inches (Essential) or 15.6 inches (Premium and EVO). EVO variants also provide an 8.8-inch digital driver’s display, heated and ventilated front seats, and a panoramic sunroof with an electric sunshade. Wheels range from 17-inch alloys with 215/60 R17 tyres on the Essential to 18-inch alloys with 235/50 R18 tyres on the Premium and EVO. For any suspension maintenance or to access the correct wheel alignment camber specifications in Australia, consult an authorised BYD dealer.
Warranty and Servicing
BYD vehicles sold in Australia are covered by a new vehicle warranty of 6 years or 150,000 km. The power battery and drive unit are covered for 8 years or 160,000 km, with a guarantee of at least 70% battery capacity retention. Normal wear and tear, tyres, and damage resulting from failure to follow correct charging procedures are excluded.
Routine servicing is required every 20,000 km or 12 months, whichever comes first. Maintenance items on the service record for the EV series include replacing the brake fluid and e-motor controller coolant. For full details on the required tasks and the capped price servicing schedule in Australia, confirm with BYD Automotive Australia.
Frequently Asked Questions
What is the BYD Atto 3 price Australia?
Official retail pricing is not published in the standard brochures or on the main model page. To find the precise driveaway price, buyers must check directly with an authorised BYD showroom.
How often does the BYD ATTO 3 need servicing?
The vehicle requires scheduled maintenance every 20,000 km or 12 months. Any severe operating conditions may require shorter intervals, so confirm with an authorised BYD dealer for specific guidance.
Can I repair the high-voltage system myself?
No, high-voltage orange cables must not be touched or opened by owners. All electrical repairs are dangerous work and must be carried out by a qualified technician.
What is the boot capacity of the ATTO 3?
The rear luggage area offers between 434 and 490 litres depending on the variant, expanding up to 1,360 litres with the rear seats folded down.
Does the BYD ATTO 3 have a front boot?
Only the ATTO 3 EVO Premium variant is equipped with a 101-litre front boot located under the bonnet. The other variants do not feature this storage space.
See Also
- BYD ATTO 3 Pricing & Purchase Guide
- BYD ATTO 3 Warranty & Documentation
- BYD ATTO 3 Logbook Servicing Guide
- BYD ATTO 3 Battery & Charging System
- BYD ATTO 3 Troubleshooting & Issues Hub
Sources
- https://bydautomotive.com.au/atto-3
- https://bydautomotive.com.au/brochures/BYD-ATTO-3-EVO.pdf
- https://bydautomotive.com.au/service-and-warranty
- https://bydautomotive.com.au/public/vehicle-warranty-2026.pdf
- https://www.drive.com.au/showrooms/byd/
Disclaimer: This guide is for informational purposes only. Official specifications, recall details, and warranty terms are determined by BYD Automotive Australia (EVDirect). Always consult an authorized dealer or official owner’s manual.