BYD SHARK 6 Accessories, Upgrades & Towing

Home › Models › BYD SHARK 6 › Accessories

BYD SHARK 6

This independent guide outlines the accessories, upgrades, and towing capabilities for the BYD SHARK 6 plug-in hybrid utility vehicle. It covers both genuine and aftermarket options for exterior protection, interior fittings, and towing hardware, alongside important information regarding software modifications and high-voltage system safety.

Note that trim names, specifications and prices reflect a compiled dataset (October 2026). BYD Automotive Australia may update variants over time, so every figure must be confirmed with an authorised BYD dealer or the official BYD Australia website. For official servicing and warranty terms, visit https://bydautomotive.com.au/service-and-warranty.

Contents

Towing Capabilities & Hardware

The BYD SHARK 6 features a Dual Mode Off-road Super Hybrid all-wheel drive powertrain that supports substantial towing hardware. The braked towing capacity reaches 2,500 kg for the Dynamic Cab Chassis and Premium trims, while the Performance variant increases this to 3,500 kg, which is suitable for towing a large caravan or a horse float. Unbraked towing is rated at 750 kg across all variants.

When fitting a towbar, the towball download weight rating must be strictly observed. The Dynamic Cab Chassis and Premium variants support a downward limit of up to 250 kg, while the Performance variant accommodates up to 350 kg. The vehicle’s Gross Vehicle Mass (GVM) is 3,500 kg across the range. The Gross Combined Mass (GCM) is set at 5,750 kg for the Dynamic Cab Chassis and Premium, and 6,650 kg for the Performance. Always refer to the official owner’s manual for specific weight distribution guidelines and payload limits, as calculating the remaining vehicle payload after adding accessories and passengers is subject to manufacturer specifications. Trailer stability control is fitted as standard safety equipment.

Exterior Accessories & Protection

Owners looking to enhance the utility of their vehicle have various exterior protection options. For front-end protection, fitting a steel bullbar with a winch mount must be done carefully to ensure it remains ADR compliant and does not interfere with the vehicle’s standard radar or camera systems, such as the 360-degree camera.

At the rear, the Premium and Performance variants feature a tub with a 1,200 L capacity. Protecting this cargo area can be achieved using a drop-in tub liner or a spray-on bedliner for heavy-duty protection. Covering the tub with an electric roller shutter or a tonneau cover helps secure cargo. Those requiring an enclosed load space might consider canopy options from aftermarket suppliers such as ARB, EGR or Ironman 4×4. The compatibility of these structural additions with the vehicle dimensions must be confirmed with an authorised BYD dealer.

The vehicle comes with an aluminium roof rail as standard equipment. Adding a roof rack platform or cross bars provides additional storage for long items, but the roof load limits must be checked. Paint protection film is another exterior option to preserve the finish from stone chips and scratches. When changing wheels, note the standard tyre size is 265/65 R18 on 18 x 8J alloy wheels, with a full-size spare tyre included.

Interior Accessories & Electronics

Inside the cabin, owners can fit protective items such as tailored floor mats and a boot liner to protect the carpets and synthetic leather seats from dirt and wear.

The BYD SHARK 6 provides power for external accessories through an in-car V2L socket (230 V) and a V2L function with a V2L adapter, allowing owners to run electrical equipment directly from the vehicle’s 29.6 kWh Blade Battery. Any interior electrical accessories or dash cameras must be installed without splicing into the high-voltage or complex 12V auxiliary systems; installation of hardwired electronics should be carried out by a qualified technician to avoid damaging the vehicle dynamic control or driver fatigue monitor systems.

Infotainment & Software Modification Risks

The interior technology includes a 12.8-inch touch screen in the Dynamic Cab Chassis, a 15.6-inch rotating screen in the Premium, and a 15.6-inch touch screen in the Performance variant. All systems include wireless Apple CarPlay alongside wired and wireless Android Auto, and a 10.25-inch LCD instrument cluster.

Modifying the infotainment system, such as sideloading unapproved applications, presents significant software and security risks. Unofficial software modifications can cause instability in the DiLink system or interfere with vehicle diagnostics. Any system updates or deep diagnostic resets must be done through official channels. Always consult an authorised BYD dealer before attempting any software alterations.

Performance Tuning & Powertrain Modifications

The hybrid powertrain combines a turbocharged engine with front and rear permanent magnet synchronous electric motors. EVDirect and BYD Automotive Australia expressly prohibit unofficial software modifications, ECU or MCU tuning, and any battery management bypass. Such alterations pose vehicle warranty risks, can invalidate insurance policies, and affect environmental and ADR compliance regulations in Australia.

The high-voltage orange cables and battery components present a severe safety risk and must not be touched or opened by owners. Any diagnostic work or repairs involving the high-voltage system, brakes, steering, or Advanced Driver Assistance Systems (ADAS) calibration must be performed by an authorised BYD dealer or qualified technician.

Furthermore, the BYD SHARK 6 runs exclusively on its plug-in hybrid powertrain. The brand has no gas program; BYD Australia does not offer, support, or authorise LPG, CNG, or autogas conversions. Any aftermarket gas modification is strictly unsupported and will void the manufacturer warranty. Always confirm with BYD Automotive Australia regarding any permitted mechanical modifications.

Frequently Asked Questions

Does the BYD Shark 6 support a 3500kg braked towing capacity?

Yes, the Performance variant supports a 3,500 kg braked towing capacity and a 350 kg towball download weight. The Dynamic Cab Chassis and Premium variants support a 2,500 kg braked towing capacity and a 250 kg towball download weight.

Can I fit a steel bullbar and winch to the BYD Shark 6?

Front-end accessories such as a steel bullbar can be fitted, provided they are ADR compliant and compatible with the vehicle’s forward collision warning and 360-degree camera systems. Fitment should be discussed with an authorised accessory provider and the vehicle manufacturer.

Does the BYD Shark 6 have tub protection options like a spray-on bedliner?

Owners can fit aftermarket protection such as a drop-in tub liner or a spray-on bedliner. The Premium and Performance variants feature a 1,200 L tub capacity that can accommodate these upgrades.

Can the ECU or MCU be tuned for more power?

No, ECU or MCU tuning and unofficial software modifications are expressly prohibited by the manufacturer. Such modifications pose serious vehicle warranty risks and can compromise the complex hybrid powertrain management.

Are gas conversions supported on the BYD Shark 6?

No, BYD Australia does not offer or authorise LPG or autogas conversions. The vehicle operates on a dedicated plug-in hybrid system, and any gas modification will void the warranty.

See Also

Sources

Disclaimer: This guide is for informational purposes only. Official specifications, recall details, and warranty terms are determined by BYD Automotive Australia (EVDirect). Always consult an authorized dealer or official owner’s manual.