Home › Models › BYD SHARK 6 › Troubleshooting › Towing & Factory Accessories
This page covers the towing specifications, towbar and wiring requirements, factory-fitted and aftermarket accessories, roof rack considerations, tub protection options, and warranty considerations relevant to the BYD SHARK 6 dual-cab plug-in hybrid ute. It is an independent, unofficial guide compiled from official BYD Australia brochure and documentation data. It is not affiliated with BYD Automotive Australia or EVDirect.
Trim names, specifications and prices reflect a compiled dataset (October 2026) and BYD Automotive Australia may update variants without notice, so every figure should be confirmed with an authorised BYD dealer or the official BYD Australia website. Note that official prices for the BYD SHARK 6 are not published; always ask an authorised BYD dealer for current pricing.
> [!NOTE] > The BYD SHARK 6 is a plug-in hybrid ute combining a 1.5-litre (or 2.0-litre on the Performance variant) engine with front and rear electric motors and a BYD Blade Battery. It is not a pure electric vehicle. For battery and charging specifics, see the BYD SHARK 6 Battery & Charging System page.
Contents
- Towing Capacity by Variant
- Towbar, Ball and Wiring Requirements
- Payload, GVM and Gross Combined Mass
- V2L External Power from the Tub
- Tub Liner, Tonneau Cover and Canopy Accessories
- Roof Rack, Platform and Cross Bar Fitment
- Warranty Considerations for Towing and Accessories
- Frequently Asked Questions
- See Also
- Sources
Towing Capacity by Variant
The BYD SHARK 6 is rated for braked towing in two tiers depending on variant. The Dynamic Cab Chassis and Premium variants have a braked towing capacity of 2,500 kg, while the Performance variant is rated for braked towing up to 3,500 kg. All three variants share an unbraked towing capacity of 750 kg. These figures are subject to manufacturer specifications and apply to a correctly hitched trailer with a functioning trailer brake system.
| Variant | Braked Towing | Unbraked Towing |
|---|---|---|
| Dynamic Cab Chassis | 2,500 kg | 750 kg |
| Premium | 2,500 kg | 750 kg |
| Performance | 3,500 kg | 750 kg |
Whether towing a caravan, horse float, or plant trailer, the applicable figure depends on which variant is registered. Loading a trailer beyond the rated capacity voids warranty coverage for related damage and may breach Australian road rules. Confirm the registered variant and its towing rating with an authorised BYD dealer before configuring any towing setup.
The BYD SHARK 6 includes trailer stability control as part of its standard safety equipment. Refer to the official owner’s manual for guidance on the system’s limitations and correct use.
Towbar, Ball and Wiring Requirements
The towball download (tongue weight) rating varies by variant: 250 kg for the Dynamic Cab Chassis and Premium, and 350 kg for the Performance. This is the maximum downward force permitted on the towball from the trailer’s coupling. Exceeding the rated tongue weight affects vehicle stability and is not covered under the vehicle warranty.
Towbar and trailer wiring on a plug-in hybrid vehicle with a high-voltage battery system requires careful installation. Wiring must not interact with the vehicle’s high-voltage orange cable network. High-voltage components must not be accessed, modified, or disturbed by owners or general workshops; this work must be carried out by an authorised BYD dealer or qualified technician with appropriate high-voltage accreditation.
Factory towbar availability and the correct trailer wiring harness for the BYD SHARK 6 should be confirmed with an authorised BYD dealer. For aftermarket towbars to be fitted without voiding warranty, they must be installed in accordance with the vehicle manufacturer’s specifications and by a suitably qualified installer. The official warranty handbook notes that loading or towing beyond specifications, and work carried out by parties other than an authorised BYD service centre, may result in warranty exclusions.
Payload, GVM and Gross Combined Mass
The gross vehicle mass (GVM) for all BYD SHARK 6 variants is 3,500 kg. The kerb weights differ by variant: 2,600 kg for the Dynamic Cab Chassis, 2,710 kg for the Premium, and 2,775 kg for the Performance variant.
| Variant | Kerb Weight | GVM | Gross Combined Mass |
|---|---|---|---|
| Dynamic Cab Chassis | 2,600 kg | 3,500 kg | 5,750 kg |
| Premium | 2,710 kg | 3,500 kg | 5,750 kg |
| Performance | 2,775 kg | 3,500 kg | 6,650 kg |
The official brochure does not state a payload figure directly; payload is determined by the manufacturer and can vary with optional equipment and accessories fitted. Do not rely on a derived calculation — confirm payload with an authorised BYD dealer or the official BYD Australia documentation for the specific vehicle configuration.
The gross combined mass (GCM) represents the maximum permitted combined weight of the laden vehicle and the laden trailer. At 6,650 kg for the Performance variant, operators towing near the 3,500 kg trailer rating must account for the total laden vehicle mass to stay within GCM. Maximum front axle load is 1,700 kg and maximum rear axle load is 1,900 kg on the Performance variant; on Dynamic Cab Chassis and Premium, front axle maximum is 1,651 kg and rear axle maximum is 1,927 kg. Confirm with BYD Automotive Australia if uncertain about axle load calculations for a specific load scenario.
V2L External Power from the Tub
The BYD SHARK 6 is equipped with a vehicle-to-load (V2L) function and V2L adapter as standard across all variants. There is also an in-car V2L socket operating at 230 V. This allows the vehicle to supply mains-equivalent power to tools, appliances, or camping equipment directly from the tub area or cabin, making it practical for trade work, site power, or running appliances such as a caravan air conditioner when stationary.
The specific output rating and any operating conditions or limitations should be confirmed with an authorised BYD dealer and in the official owner’s manual. Because the BYD SHARK 6 is a plug-in hybrid, the powertrain can support battery charge management during stationary operation; consult an authorised BYD dealer or refer to the official owner’s manual for guidance on sustained V2L use. Do not modify or bypass any V2L socket or associated wiring; damage resulting from incorrect use or modification is not covered by warranty.
The 29.6 kWh Blade Battery supports the V2L function alongside the vehicle’s driving range. For detailed charging specifications, including the AC Type 2 (7 kW) and DC CCS 2 (55 kW) charging ports, refer to the BYD SHARK 6 Battery & Charging System page.
Tub Liner, Tonneau Cover and Canopy Accessories
The Premium and Performance variants include a tub with a capacity of 1,200 L. The Dynamic Cab Chassis does not have a fixed tub; its load area depends on the tray or body fitted.
Tub liners and spray-on bedliner protection are among the aftermarket options that dual-cab ute owners in Australia fit to protect the tub floor and walls from abrasion and corrosion. Spray-on bedliners and drop-in liners are available through aftermarket suppliers. Whether a specific product is compatible with the BYD SHARK 6 tub dimensions and any integrated electrical components should be confirmed with an authorised BYD dealer before fitting.
Roller shutter tonneau covers, including electric roller shutter styles, are available as aftermarket accessories for dual-cab utes. Any tonneau cover or canopy installation must not interfere with the vehicle’s antenna, rear visibility sensors, camera systems, or any wiring. The official BYD SHARK 6 brochure lists an aluminium roof rail as standard equipment. For OEM-supplied or BYD-endorsed accessories, consult an authorised BYD dealer.
Canopy options from aftermarket suppliers — including steel and aluminium canopies from suppliers such as ARB, EGR, and Ironman 4×4 — are available for dual-cab utes in the Australian market. Compatibility with BYD SHARK 6 tub dimensions, any integrated tub features, and potential impact on rear axle load must be assessed before purchasing. Fitting any canopy must not interfere with any high-voltage components, sensors, or vehicle systems. Warranty implications of fitting a non-factory canopy should be discussed with an authorised BYD dealer prior to fitting.
Roof Rack, Platform and Cross Bar Fitment
The BYD SHARK 6 comes standard with aluminium roof rails on all variants. Roof rack cross bars, platform carriers, or backbone systems can be fitted to these rails for carrying luggage, roof tents, or work equipment.
The official brochure does not state a maximum roof load rating for the BYD SHARK 6. Overloading the roof structure affects vehicle handling and may void warranty coverage for related damage. Always refer to the official owner’s manual or confirm the roof load rating with an authorised BYD dealer before fitting any roof rack, platform, or carrier system.
Any roof-mounted equipment should not interfere with the vehicle’s sensors or safety systems. Work involving ADAS sensor recalibration following any roof or body modification must be performed by an authorised BYD dealer or qualified technician; do not attempt recalibration independently.
The vehicle height is 1,925 mm unladen. When adding roof racks or a roof tent, total vehicle height increases accordingly; operators must account for this when entering car parks, underpasses, or any height-restricted area.
Warranty Considerations for Towing and Accessories
The BYD SHARK 6 carries a 6-year / 150,000 km vehicle warranty and an 8-year / 160,000 km warranty for the traction battery and drive unit. These terms are subject to compliance with the conditions set out in the official warranty handbook, available at https://bydautomotive.com.au/service-and-warranty.
The following actions are specifically listed in the warranty handbook as grounds for exclusion from warranty coverage:
- Loading or towing beyond the manufacturer’s stated specifications
- Work carried out by any party other than an authorised BYD service centre
- Modifications, additions or alterations to the vehicle, including to software
- Use of non-BYD genuine or non-recommended parts that cause damage
- Unauthorised modifications or third-party conversions
Fitting aftermarket accessories — towbars, canopies, tub liners, roof racks, or electrical accessories — does not automatically void the entire vehicle warranty, but damage directly caused by or attributable to such an accessory or its installation may not be covered. To protect warranty entitlements, always use accessories that are compatible with the vehicle specifications, have them installed by appropriately qualified persons, and discuss any planned modifications with an authorised BYD dealer beforehand.
Accessories and modifications must also comply with Australian Design Rules (ADR) and relevant state and territory vehicle standards. Confirm with BYD Automotive Australia or a qualified engineer if any accessory requires a vehicle modification plate or engineering certification.
Frequently Asked Questions
What is the braked towing capacity of the BYD SHARK 6?
The Dynamic Cab Chassis and Premium variants are rated for 2,500 kg braked towing, while the Performance variant is rated for 3,500 kg braked towing. All variants have an unbraked towing capacity of 750 kg. Confirm the applicable rating for the registered variant with an authorised BYD dealer.
What is the maximum towball download weight on the BYD SHARK 6?
The towball download weight is 250 kg for the Dynamic Cab Chassis and Premium variants, and 350 kg for the Performance variant. Exceeding this figure affects vehicle stability and is outside the manufacturer’s specifications. Refer to the official owner’s manual for correct load distribution guidance.
Can the BYD SHARK 6 run power tools or appliances from the tub?
Yes. The BYD SHARK 6 includes a V2L function, V2L adapter, and an in-car 230 V socket as standard across all variants, enabling power to be drawn to run tools, appliances, or camping equipment. Specific output figures and operating conditions should be confirmed with an authorised BYD dealer and in the official owner’s manual.
Does fitting a canopy or tub liner affect the BYD SHARK 6 warranty?
An accessory does not automatically void the vehicle warranty, but any damage directly attributable to an accessory or its installation may be excluded from warranty cover. The warranty handbook specifically excludes damage caused by modifications, non-genuine parts, and work not carried out by an authorised BYD service centre. Discuss planned accessories with an authorised BYD dealer before fitting.
What is the GVM of the BYD SHARK 6?
The gross vehicle mass is 3,500 kg for all three variants. The kerb weight ranges from 2,600 kg (Dynamic Cab Chassis) to 2,775 kg (Performance). The official brochure does not state a payload figure directly; this should be confirmed with an authorised BYD dealer for the specific vehicle configuration and any options fitted.
Can a bullbar or winch be fitted to the BYD SHARK 6?
Bullbars and winch mounts are available from aftermarket suppliers for dual-cab utes in Australia. Any bullbar or winch fitment on the BYD SHARK 6 must comply with Australian Design Rules and must not interfere with front crash sensors, radar units, or the airbag system. Work involving ADAS sensor recalibration, airbag system components, or any vehicle safety systems must be carried out by an authorised BYD dealer or qualified technician. Confirm compatibility and warranty implications with an authorised BYD dealer before purchase.
See Also
- BYD SHARK 6 Review & Overview
- BYD SHARK 6 Warranty & Documentation
- BYD SHARK 6 Logbook Servicing Guide
- BYD SHARK 6 Powertrain & Fuel Specifications
- BYD SHARK 6 Accessories, Upgrades & Towing
- BYD SHARK 6 Battery & Charging System
- BYD SHARK 6 Suspension, Wheels & Tyres
- BYD SHARK 6 Troubleshooting & Issues Hub
Sources
- https://bydautomotive.com.au/shark-6
- https://bydautomotive.com.au/brochures/BYD-SHARK-6-2026.pdf
- https://bydautomotive.com.au/service-and-warranty
- https://bydautomotive.com.au/public/vehicle-warranty-2026.pdf
- https://bydautomotive.com.au/find-us
Disclaimer: This guide is for informational purposes only. Official specifications, recall details, and warranty terms are determined by BYD Automotive Australia (EVDirect). Always consult an authorized dealer or official owner’s manual.